Toro

Toro Z-Master 7500D | 72" Deck | REAR DISCHARGE | 25hp Yanmar | Zero Turn Mower | 72029

$30,199.00 USD

~~$30,199.00 USD~~ $30,199.00 USD

Sale Sold out

Shipping calculated at checkout.

Powerful 25 HP 1267cc Yanmar® Diesel Engine
72” (182.8cm) Rear Discharge TURBO FORCE® deck
Mow smarter with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance
Deluxe suspension seat with iso-mounts to reduce operator fatigue and vibration

Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a rear discharge 72" commercial cutting deck. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.

Specifications

Air Filter	Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
Anti Scalp Wheels	4 Standard, 2 Side Skids
Armrests	Standard
Blade Tip Speed	18,200 ft/min / 5,547 m.min
Blades	3 blades at 24.5 in. length
Box Dimensions	104.5 in. x 86.5 in. x 52.5 in. / 265.4 cm x 219.7 cm x 133.4 cm
CARB Compliant	CARB Compliant
Caster Tires	15in. x 6 in. - 6 in. (38.1 cm x 15.2 cm - 15.2 cm) Flat-Free Semi-Pneumatic
Clutch	Wet Disc
Deck Design	7-Gauge TURBO FORCE® w/ Bull-Nose Bumper
Deck Material	7 Gauge Steel
Deck Size	72 in / 183 cm
Discharge Chute	Rear
Drive System	17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
Drive Tires	26 in. x 12 in. - 12 in. (66 cm x 30.5 cm x 30.5 cm)
Engine	25 hp* 1267cc Yanmar® Diesel
Engine Brand	Yanmar
Engine Displacement (cc)	1267 cc
Engine Horsepower	25 hp
Foot Operated Height of Cut	Hydraulic with Rocker Switch
Forward Ground/Transport Speed	Up to 12.5 mph / 20.1 kph
Front Bumper	Reinforced Bull-Nose
Fuel Capacity	12.5 gal. / 45.5 L / 50 Qt.
Fuel Type	Diesel
Height of Cut	1.0 - 5.5 in. / 2.5 - 14.0 cm
Hour Meter	Horizon™ Technology
Number of Blades	3
Product Features	Anti-Scalp Rollers, Cup Holder, Deck Lift Assist, Diesel, EFI, Electric Start, Foot Operated Height of Cut, Horizon System, Rear Discharge
Product Type	Zero Turn Mowers
Product Use	Commercial
Roll-Over Protection System (ROPS)	Standard
Seat	Deluxe Suspension Seat
Spindle Bearings	Maintenance-free
Spindle Housing	9 in / 22.9 cm Diameter Cast Aluminum
Start Type	Electric
Steering Controls	1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened
Terrain Type	Rough Terrain
Weight	2,041 lbs / 925.8 kg

Disclaimer

*The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Maintenance Service Interval	Maintenance Procedure
After the first 100 hours	Check the wheel lug nuts. Adjust the parking brake.
After the first 200 hours	Change the engine oil and filter. Change the deck gearbox oil. Change the hydraulic fluid and filter.
Before each use or daily	Check the safety-interlock system. Check the engine-oil level. Check the seat belt. Check the engine-coolant level. Check the hydraulic-fluid level. Inspect the blades. Clean the engine and exhaust system area. Clean the grass and debris build-up from the machine and mower deck.
Every 50 hours	Grease the drive U-joints and splined slip joint. Drain the fuel filter/water separator. Check the tire pressure. Check the gearbox-oil level. Clean the engine-cooling system (more often in dirty and dusty conditions). Inspect the belts for cracks and wear.
Every 100 hours	Check the alternator-belt tension.
Every 200 hours	Change the engine oil and filter if not using Toro Premium Engine Oil, but any oil meeting API classification CJ-4 or higher or as stated in Engine-Oil Specifications.
Every 400 hours	Grease the deck-idler pivots. Grease the caster pivots (more often in dirty or dusty conditions). Service the air cleaner (More frequently in extremely dusty or dirty conditions). Change the engine oil and filter if using Toro Premium Engine Oil (API classification CK-4 or higher)(more often in dirty or dusty conditions). Replace the fuel-filter canister for the water separator (more often in dirty and dusty conditions). Check the fuel lines and connections. Change the deck gearbox oil. Adjust the parking brake. Change the hydraulic fluid and filter if using Mobil® 424 hydraulic fluid.
Every 500 hours	Adjust the caster-pivot bearing.
Every 800 hours	Inspect the engine-valve clearance. Change the hydraulic fluid and filter if using Toro Premium Transmission/Hydraulic Tractor Fluid.
Every 2,000 hours	Change the engine coolant.
Monthly	Check the battery charge.
Yearly	Grease the deck drive PTO. Repack the caster-wheel bearings(more often in dirty or dusty conditions). Greasing the caster-wheel hubs. If you operate the machine less than 200 hours, change the engine oil and filter.

View full details