Toro

Toro Z Master 7500D | 144" Deck| REAR DISCHARGE | 44hp Yanmar| Diesel | 72144

$85,499.00 USD

~~$85,499.00 USD~~ $85,499.00 USD

Sale Sold out

Shipping calculated at checkout.

Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. The highly productive 144-inch deck design folds up neatly for easy transport, then folds down to handle your biggest jobs — in half the time of comparable mowers. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.

Tech Assist - Save fuel and enjoy top performance with Horizon™.
144" (366 cm) Rear Discharge TURBO FORCE® deck
Powerful 44 HP Yanmar® Diesel 1568cc Engine
Keep the engine cool with twin reversing cooling fans.
Horizon360^® Business Management Software. Work More Efficiently. Run More Profitably.

Specifications

Air Filter	Heavy-Duty Donaldson® Canister-Style Air Cleaner
Armrests	Standard
Blade Tip Speed	18,500 ft/min / 5,638 m/min
Caster Tires	15 in. x 6 in. - 6 in. (38.1 cm x 15.2 cm - 15.2 cm) Flat-Free Semi-Pneumatic
Clutch	Wet Disc
Cutting Width	144 in / 366 cm
Deck Design	7-Gauge TURBO FORCE® w/ Bull-Nose Bumper
Deck Material	7 Gauge Steel
Discharge Chute	Rear
Drive System	17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
Drive Tires	26 in. x 12 in. - 12 in. (66 cm x 30.5 cm x 30.5 cm)
Engine	44 hp* Yanmar® Diesel 1568 cc
Engine Brand	Yanmar
Engine Displacement (cc)	1568 cc
Engine Horsepower	44 hp
Foot Operated Height of Cut	Hydraulic with Rocker Switch
Fuel Capacity	12.5 gal. / 47.3 L / 50 Qt.
Fuel Type	Diesel
Height of Cut	1.0 - 5.5 in. / 2.5 - 14.0 cm
Hour Meter	Horizon™ Technology
Number of Blades	6
Product Type	Zero Turn Mowers
Roll-Over Protection (ROPS)	Standard
Seat	Deluxe Suspension Seat
Spindle Bearings	Maintenance-free
Spindle Housing	9 in / 22.9 cm Diameter Cast Aluminum
Start Type	Electric
Steering Controls	1.4" (3.6 cm) Diameter Grips; Adjustable, Dampened

Disclaimer

*The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Maintenance Service Interval	Maintenance Procedure
After the first 50 hours	Change the drive wheel gearbox oil.
After the first 100 hours	Check the wheel lug nuts.
After the first 200 hours	Change the engine oil and filter. Change the hydraulic fluid and filter. Change the deck drive gearbox oil.
Before each use or daily	Check the safety-interlock system. Check the engine-oil level. Check the seat belt. Check the engine-coolant level. Check the hydraulic-fluid level. Inspect the blades. Clean the engine and exhaust system area. Clean the grass and debris build-up from the machine and mower deck.
Every 50 hours	Grease the drive U-joints and splined slip joint. Drain the fuel filter/water separator. Check the tire pressure Clean the engine-cooling system (more often in dirty and dusty conditions). Clean the engine-hood screen (more often in dirty and dusty conditions). Inspect the belts for cracks and wear. Check the deck drive gearbox-oil level.
Every 100 hours	Lubricate the mower deck-lift pivots. Check the alternator-belt tension. Check the wing deck bushings.
Every 200 hours	Grease the caster pivots (more often in dirty or dusty conditions). Change the engine oil and filter if not using Toro Premium Engine Oil, but any oil meeting API classification CJ-4 or higher or as stated in Engine-Oil Specifications. Adjust the frame caster-pivot bearing. Adjust the wing deck caster-pivot bearings.
Every 400 hours	Grease the deck-idler pivots. Service the air cleaner (More frequently in extremely dusty or dirty conditions). Change the engine oil and filter if using Toro Premium Engine Oil (API classification CK-4 or higher)more often in dirty and dusty conditions. Replace the fuel-filter canister for the water separator (more often in dirty and dusty conditions). Check the fuel lines and connections. Check the wheel gearbox oil. Change the hydraulic fluid and filter if using Mobil® 424 hydraulic fluid. Change the deck drive gearbox oil.
Every 500 hours	Check the wheel lug nuts.
Every 800 hours	Inspect the engine-valve clearance. Change the drive wheel gearbox oil. Change the hydraulic fluid and filter if using Toro Premium Transmission/Hydraulic Tractor Fluid.
Every 2,000 hours	Change the engine coolant.
Monthly	Check the battery charge.
Yearly	Grease the deck drive PTO. Repack the caster-wheel bearings(more often in dirty or dusty conditions). Greasing the caster-wheel hubs. If you operate the machine less than 200 hours, change the engine oil and filter.

View full details