1 3

Toro

Toro Z Master 6000 | 60" Deck | 37hp Vanguard | Zero Turn Mower | 72980

Toro Z Master 6000 | 60" Deck | 37hp Vanguard | Zero Turn Mower | 72980

$19,499.00 USD
$19,499.00 USD $19,499.00 USD
Sale Sold out
Shipping calculated at checkout.

The Z Master 6000 Series is one of Toro’s most advanced zero-turning radius mowers. It’s also one of our most comfortable. This Z Master® 6000 Series mower has a 37 HP Vanguard 993cc Engine with 60 in. (152 cm) TURBO FORCE® deck.

  • Our TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
  • Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue, fully adjustable to match operator comfort
  • Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
  • 37 HP* Vanguard EFI 993cc Engine with Oil Guard
  • Oil Guard delivers 500 hour oil maintenance intervals, utilizing a dry sump system and large external oil reservoir, reducing maintenance downtime.
  • Oil changes are a breeze, with large, easy fill oil cap and integrated oil filter.
  • 60" (152 cm) TURBO FORCE® deck
  • Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.

Specifications

Adjustable Discharge Baffle Standard, Tools-Free
Air Filter Heavy-Duty Canister Air Cleaner
Blade Design 0.25 in. / 0.635 cm thick heat-treated steel
Blade Tip Speed 18,500 ft/min / 5,638 m/min
Caster Tires 13 in. x 6.5 in. - 6 in. (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic
Clutch Electromagnetic
Comfort Platform Deluxe Suspension with 3-D Isolation Mounts
Cutting Width 60 in / 152 cm
Deck Design 80-Grade 7-gauge 60" (152 cm) TURBO FORCE® w/bull-nose bumper
Discharge Chute Rubber
Drive Tires 24 in. x 12 in. - 12 in. (61 cm x 30.5 cm - 30.5 cm)
Engine 37 hp* Vanguard EFI 993 cc
Engine Brand Vanguard
Engine Displacement (cc) 993 cc
Engine Horsepower 37 hp
Forward Ground/Transport Speed Up to 12.0 mph / 19.3 kph
Fuel Capacity 12 gal. / 45.4 L / 48 Qt.
Fuel Type Gasoline
Height of Cut 1.0 - 5.5 in. / 2.5 - 14.0 cm
Hour Meter Standard Hour Meter
Hydraulic Fluid Premium synthetic
Product Type Zero Turn Mowers
Roll-Over Protection (ROPS) Folding; Standard
Seat Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent
Spindle Bearings Greaseless Ball Bearings
Spindle Housing 9 in / 22.9 cm Diameter Cast Aluminum
Start Type Electric
Steering Controls 1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened

Disclaimer

*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
Maintenance Service Interval Maintenance Procedure
After the first 100 hours
  • Check the wheel lug-nut torque.
  • Check the wheel-hub slotted-nut torque.
  • Adjust the parking brake.
After the first 250 hours
  • Change the hydraulic filters and hydraulic fluid.
Before each use or daily
  • Check the safety-interlock system.
  • Check the engine-oil level.
  • Check the seat belt.
  • Check the roll bar knobs.
  • Clean the engine screen and the oil cooler.
  • Check and clean the hydraulic-unit shrouds.
  • Inspect the blades.
After each use
  • Clean the mower deck.
Every 50 hours
  • Check the tire pressure
  • Inspect the belts for cracks and wear.
  • Check the hydraulic-fluid level.
Every 100 hours
  • Lubricate the mower deck-lift pivots.
  • Check and clean engine-cooling fins and shrouds.
Every 250 hours
  • After the initial change—change the hydraulic-system filters and fluid when using Mobil 1 15W50 fluid.(Change it more often under dirty or dusty conditions)
Every 400 hours
  • Grease the caster pivots (more often in dirty or dusty conditions).
Every 500 hours
  • Change the engine oil and filter(more often in dirty or dusty conditions).
  • Check the wheel lug-nut torque.
  • Check the wheel-hub slotted-nut torque.
  • Adjust the caster-pivot bearing.
  • Adjust the parking brake.
  • After the initial change—change the hydraulic-system filters and fluid when using Toro® HYPR-OIL™ 500 fluid.(Change it more often under dirty or dusty conditions)
Every 600 hours
  • Replace the safety air filter(more often in dirty or dusty conditions).
Monthly
  • Check the battery charge.
Yearly
  • Grease the pump-belt-idler arm.
  • Repack the caster-wheel bearings(more often in dirty or dusty conditions).
  • Greasing the caster-wheel hubs.
Yearly or before storage
  • Paint chipped surfaces.
View full details