Toro TRX walk-behind trenchers are now more efficient and powerful than ever. We’ve improved our lineup with two new models that combine the groundbreaking maneuverability the TRX walk-behind trencher is known for with even better performance and serviceability.
Specifications
Boom Depth Options (cm)
61 cm, 91 cm and 122 cm
Boom Depth Options (inches)
24", 36" and 48"
Boom Width Options (cm)
10 cm, 15 cm and 20 cm (20 cm chain conversion kit available through parts only)
Boom Width Options (inches)
4", 6" and 8" (8" chain conversion kit available through parts only)
Two-section hydraulic pump with two hydraulic motors (one for each track)
Weight (kg)
505
Weight (lbs)
1114
Wheelbase (cm)
58
Wheelbase (inches)
23
Recommended Maintenance Schedule(s)
Maintenance Service Interval
Maintenance Procedure
After the first 5 hours
For Toro engines—change the engine oil and filter.
After the first 50 hours
Check and adjust the track tension.
Before each use or daily
Inspect lift and tie-down points for structural integrity.
Grease the machine.(Grease immediately after every washing.)
Check the air cleaner.
For Kohler engines—check the engine-oil level.
For Toro engines—check the engine-oil level.
Check the condition of and clean the tracks.
Test the parking brake.
Check the condition of the digging teeth and replace any that are worn or damaged.
Check for loose fasteners.
After each use
Remove debris from the machine.
Every 25 hours
Check the battery-electrolyte level(replacement batteries only).
Check the hydraulic-fluid level.
Check the digging chain for excessive wear and proper tension.
Every 40 hours
Grease the trencher housing.
Every 100 hours
For Kohler engines—change the engine oil(more often in dusty or sandy conditions).
For Toro engines—change the engine oil and oil filter(more often in dirty or dusty conditions).
For Toro engines—check the spark plug(s).
Check and adjust the track tension.
Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting supports, wear, weather, and chemical deterioration and repair if necessary.
Every 150 hours
For Kohler engines—Inspect the outer air filter.
Every 200 hours
For Kohler engines—change the engine-oil filter(more often in dirty or dusty conditions).
For Toro engines—check the valve clearance.
For Toro engines—replace the spark plug(s).
Replace the fuel filter.
Replace the hydraulic filter.
Every 250 hours
Check and grease the road wheels.
Every 300 hours
For Kohler engines—replace the outer air filter(more often in dusty or sandy conditions).
For Kohler engines—check the inner air filter.
For Toro engines—replace the air filter(more often in dirty or dusty conditions).
Every 400 hours
Change the hydraulic fluid.
Every 500 hours
For Kohler engines—replace or clean and gap the spark plug(s).
